> For the complete documentation index, see [llms.txt](https://docs.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.verifone.com/cug-57.01-en/commander-user-reference-57.01/updated-in-release-57.01.md). # Updated in Release 57.01 Release 57.01 adds security updates, payment improvements, EVPAY changes, upgrade controls, and regional enhancements. {% stepper %} {% step %} ### Minimum password age Commander now enforces a 24-hour minimum age between password changes. * Users must wait 24 hours before changing a password again. * **Forgot Password** allows one exception inside that window. * Admin and helpdesk resets stay exempt. See [Verifone Commander](/cug-57.01-en/commander-user-reference-57.01/verifone-commander.md). {% endstep %} {% step %} ### Evertec support for Puerto Rico and LAC Fuel and payment flows now work correctly with Evertec integrations. * Cash sales and refunds now send the finalization message. * Evertec returns the required control number for cash transactions. * Fuel presets now support up to `$9,999.99` on compatible dispensers. See [Fuel Sales](/cug-57.01-en/commander-user-reference-57.01/fuel-sales.md). {% endstep %} {% step %} ### Batch monitoring and recovery Release 57.01 improves handling for aging batches on CITGO and NTS networks. * Older open batches can trigger operator warnings. * Extended batch issues can block transaction processing. * Store and Forward adds stronger monitoring and recovery handling. See [Network Functions](/cug-57.01-en/commander-user-reference-57.01/network-functions.md) and [Store and Forward](/cug-57.01-en/commander-user-reference-57.01/store-and-forward.md). {% endstep %} {% step %} ### Spanish prompts on DCRs Dispenser card readers now support Spanish secure prompts for Latin America sites. * Prompts display in Spanish on supported DCRs. * Updated secure prompt firmware is required. See [Dispenser Card Readers](/cug-57.01-en/commander-user-reference-57.01/dispenser-card-readers.md). {% endstep %} {% step %} ### Shell loyalty stacking Shell EPS now supports stacked loyalty processing. * Primary and secondary loyalty programs can apply in one transaction. See [Loyalty Sales (EPS)](/cug-57.01-en/commander-user-reference-57.01/loyalty-sales-eps.md). {% endstep %} {% step %} ### Tax rate precision Commander now supports tax rates with four decimal places. * Tax rates can use up to four decimal places. * Calculations use the full configured rate. * Tax-inclusive pricing and rebate flows use the added precision. See [Taxes](/cug-57.01-en/commander-user-reference-57.01/taxes.md). {% endstep %} {% step %} ### Shift close without POS APT and VISTA sites can now close a shift without a POS. * Supports both normal and force close operations. * Lets supported forecourt-only sites close shifts directly. * APT can start a new session after the close completes. See [Reports](/cug-57.01-en/commander-user-reference-57.01/reports.md). {% endstep %} {% step %} ### Valero price tier options Valero sites now get more flexibility in price tier configuration. * Restores the editable **Price Tier** field. * Supports cash tier assignment for Valero PLCC flows. * Sites can also use a POP discount instead. See [Cash Credit Pricing](/cug-57.01-en/commander-user-reference-57.01/cash-credit-pricing.md). {% endstep %} {% step %} ### Outdoor charity prompts Charity prompts can now target outdoor transactions only. * Limits the donation prompt to outdoor payment flows. * Keeps indoor charity prompting available. * DCRs must be initialized after the change. See [Store Operations](/cug-57.01-en/commander-user-reference-57.01/configuration-client-forms/store-operations.md). {% endstep %} {% step %} ### Commander Fleet self-enrollment Commander Fleet now supports self-enrollment through 2Checkout. * Adds a self-service enrollment path. * Uses 2Checkout in the enrollment flow. * Reduces the need for manual setup steps. See [Fleet Cards - Commander Fleet](/feature-references/features-and-products-references/fleet-cards-commander-fleet.md). {% endstep %} {% step %} ### Auto Upgrade storage checks Auto Upgrade now blocks installs on systems with less than 8 GB of storage. * Adds a readiness check before installation. * Prevents upgrades on undersized systems. * Helps avoid storage-related upgrade failures. See [Auto Upgrade and VRSD](/cug-57.01-en/commander-user-reference-57.01/auto-upgrade-and-vrsd.md) and [Carity Donation](/feature-references/features-and-products-references/charity-donations.md). {% endstep %} {% step %} ### Auto Upgrade day close enforcement Auto Upgrade now enforces day close requirements during SOS processing. * Addresses failures after day conclusion without day close. * Enforces day close across pump units within SOS. * Improves upgrade reliability on affected sites. See [Auto Upgrade and VRSD](/cug-57.01-en/commander-user-reference-57.01/auto-upgrade-and-vrsd.md). {% endstep %} {% step %} ### Smart Suggestions phase 1 Release 57.01 adds the first phase of Smart Suggestions. * Introduces upselling support. * Adds suggestive selling capability. * Extends promotion-driven sales flows. See [Smart Suggestions](/feature-references/features-and-products-references/smart-suggestion.md) Feature Reference {% endstep %} {% step %} ### M425 Reference Guide A new reference guide covers M450A and M425 terminals running EVPay on Android. * Learn about terminal features, payment types, and the refreshed payment screen. * Review installation, software updates, daily operation, and troubleshooting. See [M425A Payment Terminal](https://app.gitbook.com/o/uOpE0pwQaikBOHcfkMgY/s/5nJgnNKJ9ZrZeEdr7pqh/features-and-products-references/m425a-payment-terminal). {% endstep %} {% step %} ### NAXML Deal documentation updates Release 57.01 expands NAXML Deal documentation coverage. * Adds sub-item documentation. * Adds department sales documentation. * Improves setup guidance for deal-related flows. See [NAXML Deal](/cug-57.01-en/commander-user-reference-57.01/naxml-deal.md) and [Department Sales](/cug-57.01-en/commander-user-reference-57.01/department-sales.md). {% endstep %} {% step %} ### Changing Your Fuel Price Format Correct Steps When Switching PPU Decimal Places. * Two-decimal PPU sites send prices in `$XX.XX` format. * Notifications no longer send prices in the legacy `$X.XXX` format. See [Forecourt](/cug-57.01-en/commander-user-reference-57.01/configuration-client-forms/forecourt.md). {% endstep %} {% endstepper %} --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter: ``` GET https://docs.verifone.com/cug-57.01-en/commander-user-reference-57.01/updated-in-release-57.01.md?ask=&goal= ``` `ask` is the immediate question: it should be specific, self-contained, and written in natural language. `goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.