> For the complete documentation index, see [llms.txt](https://docs.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.verifone.com/cug-57.02/commander-user-reference-57.02/updated-in-release-57.02.md). # Updated in Release 57.02 New In Release 57.02 Release 57.02 adds security updates, payment improvements, EVPAY changes, upgrade controls, and regional enhancements. {% stepper %} {% step %} ### Minimum password age Commander now enforces a 24-hour minimum age between password changes. * Users must wait 24 hours before changing a password again. * **Forgot Password** allows one exception inside that window. * Admin and helpdesk resets stay exempt. See [Verifone Commander](/cug-57.01-en/commander-user-reference-57.01/verifone-commander.md). {% endstep %} {% step %} ## Additional Support for Evertec (LAC Processor) Fuel and payment flows now work correctly with Evertec integrations. * Cash sales and refunds now send the finalization message. * Evertec returns the required control number for cash transactions. * Fuel presets now support up to `$9,999.99` on compatible dispensers. See [Fuel Sales](/cug-57.01-en/commander-user-reference-57.01/fuel-sales.md). {% endstep %} {% step %} ### Batch monitoring and recovery Release 57.01 improves handling for aging batches on CITGO and NTS networks. * Older open batches can trigger operator warnings. * Extended batch issues can block transaction processing. * Store and Forward adds stronger monitoring and recovery handling. See [Network Functions](/cug-57.01-en/commander-user-reference-57.01/network-functions.md) and [Store and Forward](/cug-57.01-en/commander-user-reference-57.01/store-and-forward-network-batch-monitoring.md). {% endstep %} {% step %} ### Spanish prompts on DCRs Dispenser card readers now support Spanish secure prompts for Latin America sites. * Prompts display in Spanish on supported DCRs. * Updated secure prompt firmware is required. See [Dispenser Card Readers](/cug-57.01-en/commander-user-reference-57.01/dispenser-card-readers.md). {% endstep %} {% step %} ### Shell loyalty stacking Shell EPS now supports stacked loyalty processing. * Primary and secondary loyalty programs can apply in one transaction. See [Loyalty Sales (EPS)](/cug-57.01-en/commander-user-reference-57.01/loyalty-sales-eps.md). {% endstep %} {% step %} ### Tax rate precision Commander now supports tax rates with four decimal places. * Tax rates can use up to four decimal places. * Calculations use the full configured rate. * Tax-inclusive pricing and rebate flows use the added precision. See [Taxes](/cug-57.01-en/commander-user-reference-57.01/taxes.md). {% endstep %} {% step %} ### Shift close without POS APT and VISTA sites can now close a shift without a POS. * Supports both normal and force close operations. * Lets supported forecourt-only sites close shifts directly. * APT can start a new session after the close completes. See [Reports](/cug-57.01-en/commander-user-reference-57.01/reports.md). {% endstep %} {% step %} ### Valero price tier options Valero sites now get more flexibility in price tier configuration. * Restores the editable **Price Tier** field. * Supports cash tier assignment for Valero PLCC flows. * Sites can also use a POP discount instead. See [Cash Credit Pricing](/cug-57.01-en/commander-user-reference-57.01/cash-credit-pricing.md). {% endstep %} {% step %} ### Outdoor charity prompts Charity prompts can now target outdoor transactions only. * Limits the donation prompt to outdoor payment flows. * Keeps indoor charity prompting available. * DCRs must be initialized after the change. See [Charity Donations Feature Reference](/feature-references/features-and-products-references/charity-donations.md) and [Store Operations](/cug-57.01-en/commander-user-reference-57.01/configuration-client-forms/store-operations.md). {% endstep %} {% step %} ### Commander Fleet self-enrollment Commander Fleet now supports self-enrollment through 2Checkout. * Adds a self-service enrollment path. * Uses 2Checkout in the enrollment flow. * Reduces the need for manual setup steps. See [Fleet Cards - Commander Fleet](/feature-references/features-and-products-references/fleet-cards-commander-fleet.md). {% endstep %} {% step %} ### Mudflap fleet code support Commander now accepts Mudflap fuel codes for commercial fleet payments. * Drivers can use Mudflap codes inside or at the dispenser. * Authorizations occur directly with Mudflap in real time. * Commercial Fleet Direct licensing is required. See [Fleet Cards - Mudflap Support](/feature-references/features-and-products-references/fleet-cards-mudflap-support.md). {% endstep %} {% step %} ### WEX and Comdata mobile fleet codes Commercial drivers can now pay at the dispenser with mobile app codes. * Supports WEX 10-4, WEX FlowCode, and Comdata Pay Codes. * Drivers enter codes through the dispenser's **CODE** softkey. * Codes use existing licensed WEX-OTR or Comdata connections. See [Fleet Cards - WEX Comdata Mobile App Fleet Codes](/feature-references/features-and-products-references/fleet-cards-wex-comdata-mobile-app-fleet-codes.md). {% endstep %} {% step %} ### Auto Upgrade storage checks Auto Upgrade now blocks installs on systems with less than 8 GB of storage. * Adds a readiness check before installation. * Prevents upgrades on undersized systems. * Helps avoid storage-related upgrade failures. See [Auto Upgrade and VRSD](/cug-57.01-en/commander-user-reference-57.01/auto-upgrade-and-vrsd.md) and [Carity Donation](/feature-references/features-and-products-references/charity-donations.md). {% endstep %} {% step %} ### Auto Upgrade day close enforcement Auto Upgrade now enforces day close requirements during SOS processing. * Addresses failures after day conclusion without day close. * Enforces day close across pump units within SOS. * Improves upgrade reliability on affected sites. See [Auto Upgrade and VRSD](/cug-57.01-en/commander-user-reference-57.01/auto-upgrade-and-vrsd.md). {% endstep %} {% step %} ### Smart Suggestions phase 1 Release 57.01 adds the first phase of Smart Suggestions. * Introduces upselling support. * Adds suggestive selling capability. * Extends promotion-driven sales flows. See [Smart Suggestions](/feature-references/features-and-products-references/smart-suggestion.md) Feature Reference {% endstep %} {% step %} ### M425 Reference Guide A new reference guide covers M450A and M425 terminals running EVPay on Android. * Learn about terminal features, payment types, and the refreshed payment screen. * Review installation, software updates, daily operation, and troubleshooting. See [M425A Payment Terminal](https://app.gitbook.com/o/uOpE0pwQaikBOHcfkMgY/s/5nJgnNKJ9ZrZeEdr7pqh/features-and-products-references/m425a-payment-terminal). {% endstep %} {% step %} ### NAXML Deal documentation updates Release 57.01 expands NAXML Deal documentation coverage. * Adds sub-item documentation. * Adds department sales documentation. * Improves setup guidance for deal-related flows. See [NAXML Deal](/cug-57.01-en/commander-user-reference-57.01/naxml-deal.md) and [Department Sales](/cug-57.01-en/commander-user-reference-57.01/department-sales.md). {% endstep %} {% step %} ### Changing Fuel Price Format Correct Steps When Switching PPU Decimal Places. * Two-decimal PPU sites send prices in `$XX.XX` format. * Notifications no longer send prices in the legacy `$X.XXX` format. See [Forecourt](/cug-57.01-en/commander-user-reference-57.01/configuration-client-forms/forecourt.md). {% endstep %} {% step %} ### *SHA1 certificates are no longer accepted* *SHA1 certificates are no longer accepted for TLS connections to remote endpoints; enure all connected systems use SHA-256 or newer certificates before upgrading.* After upgrading to Base057.01.00, the Commander refuses TLS connections that rely on SHA1: * If any remote system the Commander talks to — payment hosts, loyalty providers, back-office systems, or any third-party integration — still presents a SHA1-signed certificate, that connection will stop working after the upgrade. The fix on the site's side is to update those endpoints to modern certificates (SHA-256 or better). * Site operators or integrators who manage their own certificates should verify none of their endpoints still use SHA1 before taking the upgrade. {% endstep %} {% step %} ### CAPK table downloads over Fiserv Datawire *CAPK table downloads over Fiserv Datawire now use session-based transactions per the Datawire specification, improving download efficiency and error recovery (Datawire re-certified).* {% endstep %} {% endstepper %} --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter: ``` GET https://docs.verifone.com/cug-57.02/commander-user-reference-57.02/updated-in-release-57.02.md?ask=&goal= ``` `ask` is the immediate question: it should be specific, self-contained, and written in natural language. `goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.