Ctrlk
RegisterLogin
For the complete documentation index, see llms.txt. This page is also available as Markdown.

IX90 UX700 Quick Installation Guide

This guide walks through unboxing the IX90 UX700, adjusting the display, and connecting the required cables and peripherals.

Before you begin, confirm you have all devices, cables, and accessories listed below.

What's in the Box

Cover
Item

IX90 UX700 Terminal

Description

Display and stand assembly

Image
Cover
Item

IX90 IO Hub

Description

SUB900-002-01-A

Image
Cover
Item

IX90 Power Supply

Description

PWR159-002-01-B

Image
Cover
Item

IX90 Power Cord

Description

UK / USA / EU variants — CBL000-078-01-A, CBL000-080-01-A, CBL000-081-01-A

Image
Cover
Item

Ethernet Cable

Description

27352-02-R

Image
Cover
Item

IX90 Cable Management Base

Description

SUB900-004-01-A

Image

Quick Setup Guide

1

Unbox the IX90 UX700

Lift the display and stand assembly out of the box, then remove the IO Hub, power supply, power cord, Ethernet cable, and cable management base from the packaging.

2

Position the Display

1

Adjust the tilt angle

Press the release catch (A) at the base of the stand and tilt the display (B) up or down to the angle you need.

2

Landscape orientation

Position the display in landscape (widescreen) orientation for a merchant-facing setup.

3

Portrait orientation

Rotate the display 90° into portrait orientation for a customer-facing setup.

3

Connect the Cables

Connect each cable to its matching port on the IO Hub, as shown below.

1

Connect the Ethernet cable

Plug the Ethernet cable into the LAN port on the IO Hub.

2

Connect the power supply

Plug the power cord into the power supply, then connect the power supply to the power port on the IO Hub.

3

Connect the receipt printer

Plug the printer cable into the 2.5W USB port on the IO Hub.

4

Connect the barcode scanner

Plug the scanner cable into the 5W USB port on the IO Hub.

5

Connect the display

Plug the display cables into the two remaining ports on the IO Hub.

Full Installation Guide

For full device setup details, product information, and troubleshooting steps, refer to the IX90 UX700 Installation Guide (DOC900-007-EN-B).

PreviousTroubleshooting Guidelines
NextEngage Devices

Last updated

Was this helpful?