> For the complete documentation index, see [llms.txt](https://docs.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.verifone.com/hardware-products/hardware/android-devices/v640-series/previous-models/v660p-2/v660p-2-installation-guide/troubleshooting-guidelines.md).

# Troubleshooting Guidelines

The troubleshooting guidelines provided in the following section are included to help you install and configure your V660p-2 successfully. Typical examples of malfunction you may encounter while operating your V660p-2 device and steps you can take to resolve them are listed in this chapter.

If the problem persists even after performing the outlined guidelines or if the problem is not described below, contact your local Verifone representative for assistance.

{% hint style="info" %}
**NOTE:** The V660p-2 comes equipped with tamper-evident labels. The V660p-2 unit contains no user serviceable parts. Do not, under any circumstance, attempt to disassemble the device. Perform only those adjustments or repairs specified in this guide. For all other services, contact your local Verifone service provider. Service conducted by parties other than authorized Verifone representatives may void any warranty.
{% endhint %}

{% hint style="warning" %}
**CAUTION:** Before troubleshooting, ensure that the power supply being used to power the device matches the requirements specified at the bottom of the device. (See [Specifications](/hardware-products/hardware/android-devices/v660-series/v660p/previous-models/v660p-2/v660p-2-installation-guide/specifications.md), for detailed power supply specifications.) Obtain the appropriately rated power supply before continuing with troubleshooting.
{% endhint %}

## Device Does Not Start

If the device does not start:

* Ensure that the device is plugged into a dedicated power source.
* Check if the power cable connector is plugged in properly.

## Device Display Does Not Show Correct/Readable Info

If the device display does not show correct/readable info:

* Check all the cable connections. If the problem persists, then contact your local Verifone representative for assistance.

## Blank Display

When the device display is blank:

* If the device display is dark, tap the screen with the stylus or your finger. If the unit was in screen-saver mode, the screen will turn on when touched.
* If the display does not show correct or readable information, then check all the cable connections. If the problem persists, then contact your local Verifone representative for assistance.

## Transactions Fail to Process

There are several possible reasons why the unit may not be processing transactions. Use the following steps to troubleshoot failures.

### Checking Magnetic Card Reader

To check magnetic card reader:

{% stepper %}
{% step %}

## Perform a test transaction

Perform a test transaction using one or more different magnetic stripe cards to ensure that the problem is not a defective card.
{% endstep %}

{% step %}

## Ensure the card is swiped properly

Ensure that you are swiping the card properly (see [Using the Magnetic Card Reader](/hardware-products/hardware/android-devices/v660-series/v660p/previous-models/v660p-2/v660p-2-installation-guide/device-setup.md#using-the-magnetic-card-reader)).
{% endstep %}

{% step %}

## Process a transaction manually

Process a transaction manually using the keypad instead of the card reader. If the manual transaction works, then the problem may be a defective card reader.
{% endstep %}

{% step %}

## Contact Verifone

Contact your local Verifone representative if the problem persists.
{% endstep %}
{% endstepper %}

### Checking Smart Card Reader

To check smart card reader:

{% stepper %}
{% step %}

## Perform a test transaction

Perform a test transaction using several different smart cards to ensure the problem is not a defective card.
{% endstep %}

{% step %}

## Ensure the card is inserted correctly

Ensure that the card is inserted correctly (see [Using the Smart Card Reader](/hardware-products/hardware/android-devices/v660-series/v660p/previous-models/v660p-2/v660p-2-installation-guide/device-setup.md#using-the-smart-card-reader)).
{% endstep %}

{% step %}

## Check the MSAM cards

Ensure that the MSAM cards are properly inserted in the slots and are properly secured (see [SIM/SAM Card](/hardware-products/hardware/android-devices/v660-series/v660p/previous-models/v660p-2/v660p-2-installation-guide/device-setup.md#sim-sam-card)).
{% endstep %}

{% step %}

## Contact Verifone

Contact your local Verifone representative if the problem persists.
{% endstep %}
{% endstepper %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.verifone.com/hardware-products/hardware/android-devices/v640-series/previous-models/v660p-2/v660p-2-installation-guide/troubleshooting-guidelines.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
