Device Setup

This section outlines the setup procedures for the V660c-A device, covering the following segments:

Safety Instructions

1. Prior to connecting the equipment, thoroughly read and understand all instructions. Do not proceed with the installation until all instructions and warnings have been comprehended.
2. Ensure that there are no missing or defective parts; do not use any defective parts. Verifone holds no liability for damage or injury resulting from improper installation, misuse, or failure to adhere to safety instructions, which may void the warranty.
3. Use only attachments recommended by Verifone to avoid the risk of fire, electric shock, or injury.
4. Avoid using the device near water.
5. Do not place the unit on an unstable cart, stand, or table, as it may lead to serious personal injury or damage to the equipment.

Periodic Inspection

1. Regularly check the product and its mounting points to ensure ongoing safety.
2. Periodically inspect the device for signs of tampering, including:

   • Wires protruding from the device.
   • Foreign objects inserted into the smart card slot or magnetic stripe slot.
   • Any abnormalities in the casing beneath the magnetic stripe slot, such as bumps, and any visibly added magnetic stripe head from the side.
   • Damage to the tamper-evident labels.

Environmental Factors

1. Avoid using the device in areas with excess heat, dust, humidity, moisture, caustic chemicals, or oils.
2. Keep the device away from direct sunlight and any heat-emitting sources.
3. Be cautious around the contactless antenna, located around the display. Also, avoid placing metallic objects in its proximity.
4. Choose a customer-convenient location, avoiding dusty, hot, or damp environments.
5. To reduce data errors, select a location free from magnetic interference, maintaining a safe distance from objects or units generating magnetism.

Inside the Shipping Carton

Upon opening the shipping carton, meticulously examine its contents for any signs of tampering or shipping damage.

To Unpack the Shipping Carton

1

Thoroughly examine the shipping carton

2

Verify the sender

Verify the authenticity of the sender by checking the shipping tracking number and other details on the product order paperwork.

3

Unseal the carton box

Remove the tape.

4

Remove the inner carton box

Lift and extract the inner carton box from the outer carton box once the tape is removed.

5

Unfold the inner carton box

6

Inspect the carton contents

Conduct a detailed inspection of the shipping carton contents. The carton box includes the following components as part of the V660c-A product:

• V660c-A device
• Connectivity cables
• Paper roll
• Additional accessories (optional)

7

Remove plastic wrapping

Remove all plastic wrapping from the device and its components.

8

Remove the protective films

Peel off the clear protective film from the customer-facing payment display and the branded protective film from the merchant-facing display.

9

Preserve the packaging

Preserve the shipping carton and packing materials for potential future repacking or relocation of the device.

Do not use a tampered or damaged unit. The device is equipped with tamper-evident labels. If you observe any damage to a label or component, promptly inform both the shipping company and your Verifone service provider.

N'utilisez pas un appareil trafiqué ou endommagé. L'appareil est équipé d'étiquettes d'inviolabilité. Si vous constatez des dommages sur une étiquette ou un composant, informez-en rapidement la compagnie maritime et votre fournisseur de services Verifone.

Removing the Back Cover

To remove the back cover and access the micro SAM slots, follow these steps:

1

Turn off the device

2

Position the device

Place the device upside down on a soft, clean surface to protect the screen.

3

Loosen the retaining screw

If installed, loosen the retaining screw.

4

Slide the back cover

Slide the back cover down, as shown in Figure 1.

5

Remove the back cover

This process should allow you to safely remove the back cover and access the specified slots.

Figure 1. Removing the back cover

Installing Micro SAM Cards

To install a SAM (Security Access Module) card in the V660c-A device, follow these steps:

1

Remove the back cover

Follow the steps in "Removing the Back Cover" section.

2

Insert the SAM card

Insert the SAM card with the gold contacts facing down as shown in Figure 2.

Observe standard precautions when handling electrostatically sensitive devices. Electrostatic discharges can damage this equipment. Verifone recommends using a grounded anti-static wrist strap.

Observez les précautions standard lors de la manipulation d'appareils sensibles aux décharges électrostatiques. Les décharges électrostatiques peuvent endommager cet équipement. Verifone recommande d'utiliser un bracelet antistatique mis à la terre.

Manual Startup

V660c-A start button

Hold the start button for about 3 seconds until the device displays the startup screen.

Manual Shutdown

Hold the start button for about 1 second until the message is displayed on the screen. Select "Off" to switch off the device.

Connecting Cables

The device has dedicated input/output connectors: Ethernet, RS-232, USB-A, USB-C and DC power.

To Connect the Device to a PC

Insert the RS-232 cable to the V660c-A device and connect the other end to the PC.

Figure 3. Connecting to a PC

To Connect the Device to the LAN

Insert the Ethernet cable to the V660c-A device and connect the other end to the ethernet socket.

Figure 4. Connecting to the LAN

To Connect the Device to the External PINpad

Insert the USB-A cable to the V660c-A device and the other end to the external PINpad e.g., P400.

Figure 5. Connecting to an external PINpad

To Connect the Device to the USB Port

Insert the USB-C cable to the V660c-A device and connect the other end of the cable (USB-A) to PC.

Figure 6. Connecting a PC through the USB-C port

To Connect the Terminal Power Supply

Insert the power supply cable into the V660c-A device and plug the other end into the power supply socket.

Figure 7. V660c-A power-supply connection

V660c-A Transactions

Transaction Type	V660c-A Device
Insert	To proceed with an EMV transaction: 1. Insert the smart card into the reader slot. 2. Ensure the contacts on the smart card are facing upward. 3. Insert the card smoothly and continuously until it sits firmly. 4. Wait for the application to signal a completed transaction before removing the card. 5. Note that premature card removal may invalidate the transaction. 6. EMV transactions support both credit and debit card transactions using the specified procedure.
Swipe	The device supports both magnetic stripe cards and smart cards. Follow the steps to use the magnetic stripe card: 1. Position the card with the magnetic stripe facing backward or downward. 2. To ensure a proper read, insert the magnetic card from the side of the device. 3. Swipe the card through the magnetic card reader. 4. If using a smart card, insert the card and follow the on-screen instructions before removing it. 5. This process allows for the utilization of both magnetic stripe and smart cards with the device.
CTLS	The device supports contactless credit or debit card transactions. To carry out a contactless smart card transaction, follow the below step: 1. Gently tap the card onto the payment device or hold the card within 4 cm against the surface of the device on the top of the display, above the Contactless Reader icon.

Loading a Printer Paper

Follow these steps to insert a paper roll measuring 58 mm x 50 mm thermal printer paper into the compartment.

A message will consistently appear to indicate when the printer is out of paper.

• Low-quality paper may cause printer jams and generate excessive paper dust. To purchase high-quality Verifone paper, refer to the Accessories and Cables chapter.
• Ensure that thermal paper is stored in a dry, dark area. Handle thermal paper with care, as factors such as impact, friction, temperature, humidity, and oils can impact its color and storage properties.
• Avoid loading paper rolls with folds, wrinkles, tears, or edge holes.
• Un papier de mauvaise qualité peut provoquer des bourrages dans l'imprimante et générer une poussière de papier excessive. Pour acheter du papier Verifone de haute qualité, reportez-vous à la Chapitre Accessoires et câbles.
• Assurez-vous que le papier thermique est stocké dans un endroit sec et sombre. Manipulez le papier thermique avec précaution, car des facteurs tels que l'impact, la friction, la température, l'humidité et les huiles peuvent avoir un impact sur sa couleur et ses propriétés de stockage.
• Évitez de charger des rouleaux de papier présentant des plis, des rides, des déchirures ou des trous sur les bords.

To Install a Paper Roll

1

Open the paper door

Press both sides of the paper door simultaneously and pull it outward to open, as demonstrated as shown in the Figure 8.

2

Remove the partial paper roll

Remove any partial paper roll from the tray.

3

Prepare the new paper roll

Loosen the glued leading edge of the new paper roll or remove the protective strip.

4

Position the paper roll

Position the paper roll and pull the paper out through the printer door.

5

Close the printer door

Ensure that the printer paper extends outside the printer door, then swing the door shut until it clicks, allowing the paper to extend outside the printer door.

Figure 8. Installing a paper roll in the V660c-A device

V660c-A Wi-Fi/BT Support

The V660c-A device is equipped with an integrated WLAN RF (Wireless Local Area Network Radio Frequency) transceiver for Wireless LAN systems featuring advanced power management. Additionally, it includes an integrated radio transceiver for bluetooth wireless systems. This configuration enables wireless connectivity and communication functionalities for the device.

Camera/QR Code Reader

• Top Camera - Minimum 2MP fixed focus for barcode scanning (Focal distance 10cm - 30cm)
• Front Camera - Minimum 5MP fixed focus for facial recognition user authentication (Focal distance 30cm - 80cm)