UX301 Installation Guide
This guide is the primary source of information for setting up and installing the UX301 unit.
Audience
This guide describes the card reader's features, and provides the basic information for its installation and configuration.
Organization
This guide is organized as follows:
Device Overview — Provides an overview of the device.
Setup — Explains setup and installation of the device, selecting a location, and establishing connections with other devices.
Specifications — Discusses the power requirements and dimensions of the device.
Maintenance and Cleaning — Explains maintenance of the device.
Service and Support — Provides information on contacting your Verifone service provider and information on how to order accessories or documentations from Verifone.
Troubleshooting Guidelines — Provides troubleshooting guidelines should you encounter a problem with unit installation and configuration.
Port Pinouts — Shows the different pinout settings for ports on the UX301 persistent board as well as model-dependent boards.
Appendix A Caution and Warning Messages — Shows the UL/cUL certification-compliant translations of all Warning and Caution messages in this installation guide.
Related Documentation
To learn more about the card reader and controller device, refer to the following set of documents and their associated Verifone Part Numbers (VPNs).
UX301 Certifications and Regulations Sheet
VPN DOC159-024-EN
UX401 Certifications and Regulations Guide
VPN DOC159-034-EN
UX401 Installation Guide
VPN DOC159-035-EN
Conventions and Acronyms
This section describes the conventions and acronyms used in this guide.
Document Conventions
Various conventions are used to help you quickly identify special formatting. The following table describes these conventions and provides examples of their use.
Blue
Text in blue indicates terms that are cross referenced.
See Conventions and Acronyms.
NOTE
The pencil icon is used to highlight important information.
If exchanging cables, use a Verifone-approved cable.
CAUTION
The caution symbol indicates possible hardware or software failure, or loss of data.
Using an incorrectly rated power supply can damage the unit or cause it to malfunction.
WARNING
The lightning symbol is used as a warning when bodily injury might occur.
For safety, do not string cables or cords across a walkway.
Acronym Definitions
Various acronyms are used in place of the full definition. The following table presents acronyms and their definitions.
ARS
Anti Removal Switch
COM
Communications port
CTLS
Contactless
CTS
Clear to Send
DDRAM
Double Data Rate Random Access Memory
ETH
Ethernet
HW
Hardware
PTS
PIN Transaction Security
RF
Radio Frequency
RJ45
Registered Jack 45 modular connector
RS-232
Recommended Standard 232
RTS
Request to Send
SAM
Secure Access Module
SMA
SubMiniature version A connector
SRED
Secure Reading and Exchange of Data
USB
Universal Serial Bus
VM
Vending Machine
WAN
Wide Area Networks
Document Reference: DOC159-026-EN-C, Revision C (Verifone Part Number)
Last updated
Was this helpful?
