Specifications

This chapter discusses power requirements, dimensions, and other specifications of V200c and V400c units. Part numbers use the following conventions:

• V200c — M420-xxx-11-xxx
• V200c CTLS — M420-xxx-01-xxx
• V200c Plus — M420-xxx-04-xxx
• V400c — M425-xxx-01-xxx
• V400c Plus — M425-xxx-04-xxx

Technical Specifications

Refer to the following information on the power, weight, temperature, memory, ports and other technical details about your V200c and V400c terminals.

Unit Power Requirements

• Input power rating: 11.6 V DC, 1.55 A
• External universal-input 18 W power supply, compliant with Energy Efficiency

Temperature

• Operating Environment: 0°C to +50 °C (32 °F to 122 °F)
• Non-Operating Environment:

  • V200c: -20 °C to +60°C (- 4 °F to 140 °F)
  • V400c: -20 °C to +60°C (- 4 °F to 140 °F)
• Relative humidity: 5% to 90% RH non-condensing

Memory

• 128MB DDRAM, 256MB NAND-Flash (V200c and V400c)
• 512MB DDRAM, 512MB NAND-Flash (V200c CTLS and V400c Plus)

Magnetic Stripe Card

• Triple-track
• Supports bi-directional card read, swipe speed at 10 IPS to 40 IPS

Smart Card Reader

• Non-sliding
• Card conserving plated landing contacts
• SC voltage 1.8V, 3.0V, 5.0V

CTLS Function

• V200c CTLS, V200c Plus, V400c, and V400c Plus only

SAM Requirements

• 2 SAM slots
• ID-000 format

Communication

• Ethernet

  • Speed 10 Base-T /100 Base-TX
  • Compliant with IEEE802.3 LAN networks
• Dial modem

  • V.92 standard supported, line speeds from 2400 Kbps to 56 Kbps
• USB

  • USB 2.0 high speed
  • Supports 5 V / 600 mA to external USB device
• Multi-Communication port

  • Supports the optional MOD 10 RS-232 + USB/Mini-USB Multi-Communication dongle

Display

• V200c terminals have a 2.8-inch portrait mode transmissive TFT LCD (QVGA, 240 x 320)
• V400c terminals have a 3.5-inch portrait mode capacitive color touchscreen LCD (HVGA, 320 x 480)
• Software controllable back-light

Thermal Printer

• Support 30 LPS for first 30 sec, and then printing speed will slow down to meet 18 W power budget
• Supports 57 mm wide x up to 40 mm diameter paper roll
• Out-of-Paper Sensor

MOD 10 RS-232 + USB/Mini-USB Multi-Communication Dongle

• Customized extension cable providing USB host port or USB client functionality. Integrates RS-232, USB2.0 Host / Device IO ports into a 10-pin RJ45 connector. The MOD 10 RS-232 + USB/Mini-USB Multi-Communication dongle is not a standard in-box accessory.

V200c Plus and V400c Plus Additional Features

• SD Memory
• Bluetooth
• Wi-Fi