Specifications

This chapter discusses power requirements, dimensions, and other specifications of the V200t terminal.

V200t Terminal

Refer to the following technical information for the V200t terminal:

Unit Power Requirements

• Operating Power: 8 V DC, 2.25 A

Temperature

• Operating temperature: 0° to 50° C (32° to 122° F)
• Storage temperature: -20° to 60° C (-4° to 140° F)

Humidity

• Relative humidity: 5% to 90% (RH non-condensing)

External Dimensions

• Length: 185 mm (7.3 in)
• Width: 78 mm (3.1 in)
• Depth: 54 mm (2.1 in)

Weight

• Unit weight: 274 g (9.66 oz)

Memory

• 384MB (DDR3L: 128MB, NAND Flash: 256MB)

Display

• 2.8" color TFT 240 (RGB) x 320 (HVGA)

Battery Pack

• Single-cell 2450 mAH battery pack.
• Meets IEEE1725 requirements
• EEPROM is included for battery ID
• Integrated Booster, Fuel gauge, charger IC and safety circuits inside

Magnetic Card Reader

• Triple track (tracks 1, 2, 3), high coercivity, bi-directional

Primary Smart Card

• ISO 7816-3, 1.8 V, 3 V, 5 V
• Synchronous and Asynchronous cards
• EMV Approved

SAM Card Reader

• Two Security Access Module (SAM) slots

SIM Card Reader

• Two Security Access Module (SIM) slots

Connectivity

• GSM

  • GPRS/GSM Class 10
  • GPRS DL 85.6 kbps, UL 42.8 kbps
• GPRS (V200t Plus Only)

  • GPRS/GSM Class 10
  • UMTS/HSPA DL 7.2Mbps, UL 5.7Mbps
• Bluetooth

  • BT class 1.5 with up to 100m range as a goal (line of sight)
  • BT v4.1 integrated
  • BT v4.2 security connection support by FW update
• WiFi

  • 2.4Ghz / 5Ghz frequency channel support
• Ethernet RJ45

  • Speed 10 Base-T /100 Base-TX
  • Compliant with IEEE802.3 LAN networks.
• Dial modem RJ11

  • V.92 standard supported, line speeds of up to 56 Kbps
• USB type-A receptacle

  • USB2.0 high speed
• MOD 10 2-in-1 I/O port

  • Supports 5 V / 500 mA to external USB device
  • Total 5 V support is 600 mA

Security

• 3DES encryption, Master/Session and DUKPT key management
• VeriShield file authentication
• PCI PED 5.x approved