Victa Full Feature Base Quick Installation Guide

Use this guide to unbox, identify, and set up Victa Full Feature Base.

Before you begin, confirm you have all device, cable, and accessories listed below.

What's in the Box

Cover

Victa FF Base

Cover

Power brick

*varies by country

Device Walkthrough

Front

1

USB-C

2

USB-A

3

USB-B

4

Ethernet (LAN)

1

Location pins

2

Pogo pins

3

Charging indicator LED

4

BT status indicator

5

BT pairing button

Rear

1

Adhesive foot

Quick Setup Guide

Mount the Base Using Adhesive

1

Peel off the protective film.

2

Place the Victa FF Base on a stable, flat surface.

Grab and Go

1

Lift the Victa Mobile device off the Victa FF Base by disengaging it from the locating pins.

2

Lift the Victa Portable device off the Victa FF Base by disengaging it from the locating pins.

Direct Fix

1

Unscrew the location pins using a screwdriver

2

Remove the location pins

3

Place the Victa Mobile Device and fix the screws.

4

Place the Victa Portable Device and fix the screws.

Connect to Power and Peripherals

Full Installation Guide

For full device setup details, product information, and troubleshooting steps, refer to the Installation Guide.

VPN: DOC573-024-ENG-A, Rev A00

PreviousTroubleshooting Guidelines

NextVicta Register

Last updated 1 month ago

Was this helpful?