Ctrlk
RegisterLogin
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Victa Lane Quick Installation Guide

Use this guide to unbox, identify, and set up Victa Lane.

Before you begin, confirm you have all devices, cables, and accessories listed below.

What's in the Box

Cover

Victa Lane Device

Cover

SIM Ejector PIN

Device Walkthrough

Left side

1

SIM/SAM/SD tray

2

Audio jack

3

Protective sticker

4

Power/Navigator button

5

Volume Buttons

Front

1

Biometrics Cameras and Sensors

2

MSR Slot

3

Display

4

Contactless

5

Stylus and Holder

6

EMV Reader

7

Countertop Base

8

Speaker

9

Loyalty Camera/Barcode Scanning

Back

1

Lock

2

Screw mounts

3

Stylus holder mounts

Quick Setup Guide

1

Insert SIM/SAM/SD for Victa Lane

Locate the SIM/SAM ejector slot on the Victa Lane and use the SIM ejector pin to remove the tray.

Power off the device before opening the tray. Ensure the tray is fully closed before powering the device on.

2

Attach the Stylus Holder

  1. Align the holder with the mounting slots. Place the holder in the slots.

  1. Slide the holder to the left-hand side to lock it in place. Slide the holder to the right-hand side to remove it.

3

Connect the Cable

Connect the cable to the Victa Lane.

4

Place the Device on the Countertop Base

Place the Victa Lane on the countertop base, then slide it up to lock it in place and down to remove it.

5

Connect to Power

  1. Connect the VLE3 cable's USB-C connector to the Victa Lane.

  2. Connect one end of the power cord to the DC Jack.

  3. Connect the power adapter to a grounded power outlet.

  4. Connect the Ethernet connector to the Ethernet socket.

6

Orange Dongle Connection

Connect one end of the VL2/VL4 cable to the Victa Lane and the other end to the D3 Dongle.

7

Payment Methods

EMV Chip / Contactless (CTLS) / Magnetic Stripe

8

Barcode/QR Code Scanning

Present the barcode or QR code to the scanner window underneath, on the left-side of the Victa Lane.

Full Installation Guide

For full device setup details, product information, and troubleshooting steps, refer to the Installation Guide.

VPN: DOC573-010-ENG-A, Rev A00

PreviousTroubleshooting Guidelines
NextVicta Portable

Last updated

Was this helpful?