Victa Register Installation Guide

This guide is the primary source of information for setting up the Victa Register.

Audience

This guide is intended for the users involved in the installation of the Victa Register.

Organization

This guide is organized as follows:

• Device Overview. Provides an overview of the Victa Register.
• Specifications. Discusses power requirements, dimensions, and other specifications of the Victa Register.
• Accessories. Provides the range of accessories and cables with corresponding part numbers.
• Device Setup. Explains the setup and installation, selecting a location, and establishing connections.
• Service and Support. Provides information on how to contact your local Verifone representative or service provider and information on how to order accessories or documentation from Verifone.
• Troubleshooting Guidelines. Provides troubleshooting guidelines.

Related Documentation

To learn more about the Victa Register, refer to the following document associated with the Verifone Part Number (VPN).

Document	VPN
Victa Register QIG	DOC573-114-ENG-A
VG100 Certification and Regulations	DOC576-001-EN-A

Conventions

The following table describes the conventions and provides examples of their use.

Convention	Meaning	Example
NOTE	The bulb icon is used to highlight important information.	If exchanging cables use a Verifone-approved cable.
CAUTION	The caution symbol indicates possible hardware or software failure or loss of data.	Avoid placing metallic objects at the front of the card reader.
WARNING	The lightning symbol is used as a warning when bodily injury might occur.	For safety, do not string cables or cords across a walkway.

VPN: DOC573-013-ENG-A, Rev A00.1