# What's New In Release: 55.02.01

<h2 align="center">Enhancement</h2>

### EPS System <a href="#bookmark141" id="bookmark141"></a>

#### FID Table and Auto Upgrade

The values in the FID (Field Identifier) table will now be retained after an auto upgrade. These values are the location, location address, location city, location state, and location ZIP code.

<h2 id="bookmark142" align="center">Resolutions</h2>

### Verifone Self Checkout <a href="#verifone_self_checkout" id="verifone_self_checkout"></a>

The Verifone Self Checkout was limiting the entry for the Alt Loyalty prompt to 12-digits. This was corrected and increased to 14-digits.

### Dispenser Card Readers <a href="#bookmark144" id="bookmark144"></a>

1. When a transaction level discount was applied for a purchase, the discount was displayed, but there was an extra “Rewards 0.00” on the DCR receipt. This was corrected and now only the actual rewards amount will display on the DCR receipt.
2. After upgrading to Verifone Commander 55.02 release and then performing an EMV outdoor transaction, the Start ICC (Integrated Circuit Card) Transaction timed out resulting in a transaction failure. This was an intermittent issue that could be resolved by initializing the DCR and hard rebooting the Verifone Commander. However, the issue reappeared after performing a few transactions. This was corrected.

### EPS System <a href="#bookmark145" id="bookmark145"></a>

When the Enter key was pressed for Vehicle ID without entering a value, the fleet card receipt printed “null” for the “Veh #” value. This was corrected and now nothing will print if value is not entered.

### Loyalty <a href="#bookmark146" id="bookmark146"></a>

1. When a customer used a loyalty card to purchase fuel at a site with multiple loyalty programs configured, they received a discount message and the discount on purchase, however in some cases the transaction was never sent to the loyalty host resulting in a shortage on loyalty sales. This was corrected and now the system will ensure that the transaction completion will be sent to the valid loyalty host in all cases.
2. Hybrid card program was not displaying in loyalty program list. This was corrected and include the hybrid card will be included in the loyalty program list when auth on total is enabled.
3. Site was receiving “PCATS ISO FORMAT ERROR” on an inside loyalty discount immediately pressing Total. This was caused when the loyalty receipt text provided by LFEP as description text (either short or long) was used as a label and it was blank. This was corrected and now the system check to see if the value is blank.

### Sales <a href="#bookmark147" id="bookmark147"></a>

When the cashier opened the cash drawer manually using the key and then closed it while the sale was still processing, it caused the system to create the same transaction twice resulting in discrepancies in the reports. This was corrected.

<h2 id="bookmark148" align="center">FEP Specific Changes </h2>

### Rapid Connect FEP <a href="#bookmark149" id="bookmark149"></a>

#### Enhancements <a href="#bookmark150" id="bookmark150"></a>

**Default NTP Server for BP Brand**

The default NTP server will now be the IP Address “149.196.96.120” for the Brand BP in the Buypass distribution.

**Fleet Card Certification and Support**

{% hint style="info" %}
Fleet cards are currently certified for M400, P400, Bennett, Gilbarco, Invenco, and Wayne devices (See the DCR firmware section for minimum versions).
{% endhint %}

Card support has been added to the Buypass (Fiserv) distribution for EMV WEX and Visa Fleet 2.0 and host-based restrictions, EMV Fuelman cards, EMV contactless refund transactions, EMV contactless support for JCB, formerly known as Japan Credit Bureau, and Union Pay International (UPI), formerly known as China Union Pay, and Visa Fleet 2.0 support for non-capable and non-certified devices.

#### Resolutions <a href="#bookmark151" id="bookmark151"></a>

1. Comdata Mastercard transactions were failing with an “Invalid Product” message. This was corrected.
2. Comdata DCR transactions came due inside with a 911 error message. A 911 error is a temporary and intermittent error that occasionally occurs on the host when they get a timeout on their end. This was corrected and now if the host response is a 911 error, the live completion will be moved to Store and Forward.
3. For TransCard and Fuelman cards, the customer was able to fuel and complete the transaction. The system received a “Network Unavailable” response with response code “911” from the host, but the transaction was locally approved. This was corrected.
4. When the merchant was performing a transaction with Express Code and Comchek, the transaction was declined with E16 ISO Format Error. This was corrected.

### Verifone EPS (LAC) <a href="#verifone_eps_-lac" id="verifone_eps_-lac"></a>

#### Enhancement <a href="#bookmark153" id="bookmark153"></a>

**Maximum Value For Pump Authorization**

The Verifone Configuration Client > Payment Controller > EPS Configuration > (FEP) Configuration > FEP Card > Card Limits > Maximum Value For Pump Authorization was changed to allow up to ‘999999’ or 6-digits.

#### Resolution <a href="#bookmark154" id="bookmark154"></a>

When configuring the printer, Fiscal or Standard, the user was unable to bring it online and the logs and Verifone Configuration Client were displaying errors. This was corrected.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.verifone.com/petroleum-docs/petro-and-c-store/commander-and-integrated-pos/commander-release-notes/verifone-commander-release-55.02.05/whats-new-in-release-55.02.01.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.