# Gilbarco

###  Gilbarco: FlexPay IV (M7)

{% hint style="info" %}
For Chevron sites, they should use 6.8.2.25-x VIPA. Chevron is not certified for 6.8.2.32. The version to load would be xx.13.10\_US00.05. (xx - being the PCI of the dispenser > PCI 4 being 04 and PCI 5 would be 05. For the version to load, PCI 4.0 would be 42 and PCI 5.0 would be 52.)

If the site has FlexPay IV v42.11.47 or v52.11.47 and debit transactions are receiving an “INVALID PIN” response from the host, Gilbarco has corrected this with the v42.11.53 and v52.11.53 software releases.

Cash Acceptors are not supported with EMV.

GSM, SDES, and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>EMV Support</strong></td><td></td></tr><tr><td valign="top">EMV Contact</td><td>Certified</td></tr><tr><td valign="top">EMV Contactless</td><td>Certified</td></tr><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">EMV (PCI DSS 5.0) Non-Fleet 2.0</td><td>52.12.45</td></tr><tr><td valign="top">EMV (PCI DSS 4.0) Non-Fleet 2.0</td><td>42.12.45</td></tr><tr><td valign="top">Fleet 2.0 Version (PCI DSS 5.0)</td><td>FPIVOPT_V05.13.10_US00.07</td></tr><tr><td valign="top">Fleet 2.0 Version (PCI DSS 4.0)</td><td>FPIVOPT_V04.13.10_US00.07</td></tr><tr><td valign="top">Fleet 2.0 VIPA</td><td>6.8.2.32 (For Chevron sites, see note below.)</td></tr><tr><td valign="top">Graphics</td><td>42.05.11 - P609</td></tr><tr><td valign="top">Applause (Graphics)</td><td>42.05.11 - P609</td></tr><tr><td valign="top">Cash Acceptors</td><td>42.05.11 - P609</td></tr><tr><td valign="top">Scanner</td><td> </td></tr><tr><td valign="top">Contactless (RFID) with UX 400</td><td>42.05.11 - P609</td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td></tr><tr><td valign="top">Non-Debit</td><td>42.05.11 - P609</td></tr><tr><td valign="top">TDES</td><td>42.05.11 - P609</td></tr></tbody></table>

### Gilbarco: FlexPay II (M5)

{% hint style="info" %}
Cash Acceptors are not supported with EMV.

GSM, SDES, and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>EMV Support</strong></td><td></td><td></td></tr><tr><td valign="top">EMV Contact</td><td>Certified</td><td></td></tr><tr><td valign="top">EMV Contactless</td><td>Certified</td><td></td></tr><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td><td></td></tr><tr><td valign="top">EMV</td><td>3.6.06</td><td></td></tr><tr><td valign="top">Graphics</td><td>30.3.03</td><td></td></tr><tr><td valign="top">Cash Acceptors</td><td>30.3.03</td><td></td></tr><tr><td valign="top">Scanner</td><td> </td><td></td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td><td></td></tr><tr><td valign="top">Non-Debit</td><td>30.3.03</td><td></td></tr><tr><td valign="top">TDES</td><td>30.3.03</td><td></td></tr></tbody></table>

### &#x20;Z80 Logic Board

{% hint style="info" %}
Cash Acceptors, GSM, Graphics, Scanner, Contactless (RFID), SDES, TDES, and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">Debit</td><td></td></tr><tr><td valign="top">Non-Debit</td><td>50.2.4</td></tr></tbody></table>

### Encrypting PIN Pad (EPP) with Advanced GSM

{% hint style="info" %}
An Advanced GSM is not required if EPP is injected with the correct debit key. However, it can be used until the EPPs are injected with the correct debit key.

Master Session and Cash Acceptors are not supported.

Please contact your Gilbarco servicer for the correct setup of the EPP and the mapping of the keypad.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td valign="top"><strong>Minimum Version</strong></td></tr><tr><td valign="top">Advanced GSM</td><td valign="top">See CRIND versions below.</td></tr><tr><td valign="top">Graphics</td><td valign="top"></td></tr><tr><td valign="top">Scanner</td><td valign="top"></td></tr><tr><td valign="top">Contactless (RFID)</td><td valign="top"></td></tr><tr><td valign="top"><strong>Debit</strong></td><td valign="top"></td></tr><tr><td valign="top">SDES (DUKPT)</td><td valign="top">See CRIND versions below.</td></tr><tr><td valign="top">TDES</td><td valign="top"></td></tr><tr><td valign="top"><strong>CRINDs</strong></td><td valign="top"></td></tr><tr><td valign="top">Advantage</td><td valign="top">62.6.10</td></tr><tr><td valign="top">Encore 300</td><td valign="top">62.6.10</td></tr><tr><td valign="top">Encore 500</td><td valign="top">3.1.50</td></tr><tr><td valign="top">Ecilpse</td><td valign="top">3.1.50</td></tr></tbody></table>

### Advantage CRIND (Z180 Logic Board)

{% hint style="info" %}
InfoScreen graphics are supported only in single-line mode. Version 60.7.30 is NOT supported for any mode.

TDES and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th width="358" valign="top"></th><th width="249"></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">Cash Acceptors</td><td>60.9.40</td></tr><tr><td valign="top">GSM</td><td> </td></tr><tr><td valign="top">Graphics: Monochrome</td><td>609.40</td></tr><tr><td valign="top">Graphics: InfoScreen</td><td>609.40</td></tr><tr><td valign="top">Scanner</td><td>609.40</td></tr><tr><td valign="top">Contactless (RFID)</td><td>609.40</td></tr><tr><td valign="top">Debit</td><td></td></tr><tr><td valign="top">Non-Debit</td><td>60.9.40</td></tr><tr><td valign="top">TDES</td><td>60.9.40</td></tr></tbody></table>

### Encore 300

{% hint style="info" %}
InfoScreen graphics are supported only in single-line mode. Version 60.7.30 is NOT supported for any mode.

TDES and Master Session are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th valign="top"></th><th></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td><td></td></tr><tr><td valign="top">Cash Acceptors</td><td>60.9.40</td><td></td></tr><tr><td valign="top">GSM</td><td> </td><td></td></tr><tr><td valign="top">Graphics: Monochrome</td><td>609.40</td><td></td></tr><tr><td valign="top">Graphics: InfoScreen</td><td>609.40</td><td></td></tr><tr><td valign="top">Scanner</td><td>609.40</td><td></td></tr><tr><td valign="top">Contactless (RFID)</td><td>609.40</td><td></td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td><td></td></tr><tr><td valign="top">Non-Debit</td><td>60.9.40</td><td></td></tr><tr><td valign="top">TDES</td><td>60.9.40</td><td></td></tr></tbody></table>

### Encore 500/Eclipse

{% hint style="info" %}
Contactless (RFID), TDES and M/S are not supported.
{% endhint %}

<table data-header-hidden><thead><tr><th width="249" valign="top"></th><th></th></tr></thead><tbody><tr><td valign="top"><strong>Supported Options</strong></td><td><strong>Minimum Version</strong></td></tr><tr><td valign="top">Cash Acceptors</td><td> </td></tr><tr><td valign="top">GSM</td><td> </td></tr><tr><td valign="top">Graphics: Monochrome</td><td> </td></tr><tr><td valign="top"><strong>Debit</strong></td><td></td></tr><tr><td valign="top">Non-Debit</td><td> </td></tr><tr><td valign="top">SDES (DUKPT)</td><td> </td></tr></tbody></table>

<br>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.verifone.com/petroleum-docs/petro-and-c-store/commander-and-integrated-pos/commander-release-notes/verifone-commander-release-55.02.08/dispenser-card-readers-supported-options/gilbarco.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.