# What's New In Release: 55.02.02

<h2 align="center">Resolutions</h2>

### Verifone C-Site Management <a href="#bookmark116" id="bookmark116"></a>

For Brand transitions, Loyalty Configurations were not received in Verifone C-Site Management from the Verifone Commander after onboarding for the first time. This was corrected and now the Loyalty Configurations are received.

### Verifone Self Checkout <a href="#bookmark117" id="bookmark117"></a>

After an Auto Upgrade, if the C18 was switched to Portrait mode and the user selected the Verifone Self Checkout application, “Sorry, no application is currently supported” message was displayed. This was corrected and now after an Auto Upgrade, the Verifone Self Checkout application can be run in Portrait mode without any errors”.

### Dispensers <a href="#bookmark118" id="bookmark118"></a>

The fuel driver was not displaying the discounted the cash and credit prices for Bennett direct interface for single price windows. This was corrected and now it will display the cash or credit prices.

### Dispenser Card Readers <a href="#bookmark119" id="bookmark119"></a>

1. Transaction was not completely terminated for a payment failure after loyalty scenario. It was occurring when a payment card was inserted while payment prompt after loyalty was displayed. The customer was prompted to remove card that gave the impression the payment had completed normally. If the customer lifted the handle and the cashier authorized a postpay, customer would likely to fuel and not follow prompt to pay inside since the card was already presented to the DCR. This was corrected and the transaction will terminate if a payment failure occurs after loyalty.
2. WEX cards include alphanumeric prompts even when the expected response is numeric only. The system was rejecting alphanumeric prompts when the DCR keypad was not configured as alphanumeric. This was preventing certain WEX cards from being approved. This was corrected and now the format error generated for alphanumeric prompts sent to DCR with a numeric keypad will be bypassed.
3. When a second cashier approved the same dispenser from a different POS terminal within roughly five seconds of the first approval, the first approval armed the pump and the second caused an error that removed the receipt number. This caused a sale from the second approval to come due inside. This was corrected and now the receipt number is retained if an error occurs during the approval of a calling pump. This will prevent the sale from coming due inside in cases where pump is armed and an error occurs.

### Loyalty <a href="#bookmark120" id="bookmark120"></a>

The Loyalty element was being created with the FEP name as the program name for hybrid cards and it was causing an “E33 Error” during a loyalty transaction. This was corrected and now the Card Type Label will be used to create the loyalty element for hybrid cards.

### Mobile <a href="#bookmark121" id="bookmark121"></a>

The EPS was blocking mobile receipt text from printing on all receipts that were not completions. This was corrected and now the EPS no longer blocks receipt texts, but the POS does not send receipt text on prepay receipts.

<h2 id="bookmark122" align="center">FEP Specific Changes </h2>

### Chevron FEP <a href="#bookmark123" id="bookmark123"></a>

#### Resolution <a href="#bookmark124" id="bookmark124"></a>

The POS was displaying “Card has two fuel product” message and then declining the sale when using some cards. It was caused by the system checking for 900 series product codes and passing them as fuel. It incremented the fuel purchased count that went beyond the fuel limit allowed by Chevron. This was corrected and now the system will use NACS product codes to filter out 900 series product codes.

### HPS FEP <a href="#bookmark125" id="bookmark125"></a>

#### Enhancements <a href="#bookmark126" id="bookmark126"></a>

**Fleet Card Certification and Support**

{% hint style="info" %}
Fleet cards are currently certified for M400, P400, Bennett, Gilbarco, Invenco, and Wayne devices (See the DCR firmware section for minimum versions).
{% endhint %}

Card support has been added to the HPS distribution for EMV WEX and Visa Fleet 2.0 and host-based restrictions, EMV Voyager cards, EMV contactless refund transactions, and Visa Fleet 2.0 support for non-capable and non-certified devices.

**ARCO and Tesoro Brands**

ARCO/Tesoro was removed from the Brand selection in the HPS distribution when using the Verifone Petro Suite Installer and Verifone Configuration Client.

#### Resolution <a href="#bookmark127" id="bookmark127"></a>

A Verifone Commander property file did not contain the needed instruction to point to the required Gilbarco M7 3.12 kernel version. This was corrected and the file was edited to contain the required Gilbarco M7 3.12 kernel version needed.

### Phillips 66 FEP <a href="#bookmark128" id="bookmark128"></a>

#### Enhancement <a href="#bookmark129" id="bookmark129"></a>

**Fleet Card Certification and Support**

{% hint style="info" %}
Fleet cards are currently certified for M400, P400, Bennett, Gilbarco, Invenco, and Wayne devices (See the DCR firmware section for minimum versions).
{% endhint %}

Card support has been added to the Phillips 66 distribution for EMV WEX and Visa Fleet 2.0 and host-based restrictions, EMV Voyager cards, EMV contactless refund transactions, and Visa Fleet 2.0 support for non-capable and non-certified devices.

#### Resolution <a href="#bookmark130" id="bookmark130"></a>

A Verifone Commander property file did not contain the needed instruction to point to the required Gilbarco M7 3.12 kernel version. This was corrected and the file was edited to contain the required Gilbarco M7 3.12 kernel version needed.

<h3 id="bookmark131" align="center">Rapid Connect FEP</h3>

#### Enhancement <a href="#bookmark132" id="bookmark132"></a>

**US Common AID**

Currently, for Fiserv distributions, US Common AID has a non-zero CVM limit. Cardholders below the limit are not prompted for a PIN, resulting in the transactions being processed as credit without opportunity to process as debit. The CVM limits were updated to $0 as per requirement.

#### Resolutions <a href="#bookmark133" id="bookmark133"></a>

1. The Fiserv AID Rules Table for inside and outside was incorrect for Fuelman cards. This was corrected and now the Issuer Identification Number (IIN) must be set to ‘NO’.
2. When an offline transaction was performed with an EMV card, it was declining with a “E03 Sale Declined” message. This was corrected and now the transaction will be successful with a local authorization confirmation.
3. A Verifone Commander property file did not contain the needed instruction to point to the required Gilbarco M7 3.12 kernel version. This was corrected and the file was edited to contain the required Gilbarco M7 3.12 kernel version needed.

### VAPS FEP <a href="#bookmark134" id="bookmark134"></a>

#### Enhancements <a href="#bookmark135" id="bookmark135"></a>

**Fleet Card Certification and Support**

{% hint style="info" %}
Fleet cards are currently certified for M400, P400, Bennett, Gilbarco, Invenco, and Wayne devices (See the DCR firmware section for minimum versions).
{% endhint %}

Card support has been added to the VAPS distribution for EMV WEX and Visa Fleet 2.0 and host-based restrictions, EMV Voyager cards, EMV contactless refund transactions, and Visa Fleet 2.0 support for non-capable and non-certified devices.

**Marathon Brand**

Marathon was removed from the Brand selection in the VAPS distribution when using the Verifone Petro Suite Installer and Verifone Configuration Client.

#### Resolution <a href="#bookmark136" id="bookmark136"></a>

A Verifone Commander property file did not contain the needed instruction to point to the required Gilbarco M7 3.12 kernel version. This was corrected and the file was edited to contain the required Gilbarco M7 3.12 kernel version needed.

### Verifone EPS <a href="#verifone_eps" id="verifone_eps"></a>

#### Resolution <a href="#bookmark138" id="bookmark138"></a>

A Verifone Commander property file did not contain the needed instruction to point to the required Gilbarco M7 3.12 kernel version. This was corrected and the file was edited to contain the required Gilbarco M7 3.12 kernel version needed.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.verifone.com/petroleum-docs/petro-and-c-store/commander-and-integrated-pos/commander-release-notes/verifone-commander-release-55.02.08/whats-new-in-release-55.02.02.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.