Site Configuration

Site Configuration in Verifone Commander Central allows for site level price book configurations to be configured and managed in the cloud and then transmitted to a single or multiple sites. Support for site configuration remote management within Verifone Commander Central requires software Release 54.01 or higher.

Site Configurations consists of the information previously located under Store Operations in Configuration Client.

Configuration Syncing

Initial Onboarding

• When the Verifone Commander is initially onboarded into the cloud, if it is on Release 54.01 or higher, it will transmit its current site configuration to Verifone Commander Central.

• The current configuration is only transmitted to Verifone Commander Central during the initial onboarding.

Configuration Updates

• After the initial upload of the current configuration, any updates made in Verifone Commander Central can be sent to the site by the merchant administrator.

• If updates are sent to the site from Verifone Commander Central, the last update sent will override previously transmitted or locally stored data.

• Any changes performed on the local site Verifone Commander will sync to Verifone Commander Central.

A message will be displayed on Site Configuration forms when the Verifone Commander software release version doesn't support configuring the form.

Site Search

1

Site Management

Site Configurations are uploaded and managed by each individual site. To search for the specific site, navigate to Verifone Commander Central > Site Management.

2

Three Ways

Searching by site name.

Using the Hierarchy drop-down menu to filter specific groups of sites.

Paging through the site listings.

3

Select Site

After locating the site to view, select it from the list to open the site configurations.

Replicate Configuration

The Replicate Configuration feature allows a site’s datasets to be copied from one location to multiple other site locations. Support for this functionality relies upon the datasets being present and available in both the Source Site and the Destination Site(s).

1

Replicate Configuration

To replicate a site’s configuration, navigate to Verifone Commander Central > Site Management. Select Replicate Configuration from the top right corner.

2

Source Site

Select a source site from the drop-down menu. The source site must be onboarded to be selected.

3

Select Configurations

Select the configuration(s) to be copied from the available list. Be aware that if the destination site(s) do not have the dataset available, they will not appear in the Select Destination Site(s) list.

4

Drop-Down Site Search Menu

Either search for the site(s) by name using the ‘Search by Name’ field, or use the hierarchy selection drop-down menu to select the site(s) to copy the datasets to.

5

Save

Select Save to complete the transfer to the selected site(s). Changes made to the locations dataset can be checked within the Site’s configuration page. Selecting Discard will cancel all the options selected and reset the form.