PIN Pad

This section provides detailed information on how to configure the PIN pad Idle and Swipe Messages and PIN pad Listing. This section is found under C-Site Management > Site Management > Site Name > Payment Operations > PIN pad.

PIN pad Message

1

Enter Messages

Enter the Idle Message and/or Swipe Message.

2

Apply Changes

Click on Apply Changes or Discard them.

PIN pad Listing

Primary is shown first followed by secondary PIN pad.

Field/Button	Description
Add POP	Add a new PIN pad.
Delete POP	Select and delete a PIN pad from the displayed list.
POP ID	Displays the POP ID.
Model	Displays the PIN pad model.
IP Address	Displays the IP address for the PIN pad.
Port	Displays the port for the PIN pad.
Connect with TLS	Select if the PIN pad is communicating on TLS.
Secure Port	Displays the secure port.
Signature Capture Enabled	Enable signature capture on the PIN pad.
Line item Display Enabled	Enable Line Item Display.
Line Item Display Port	Displays the port used by the Line Item Display.
Discard	Remove any changes made to this form.
Apply Changes	Save all changes made to this form.

Add POP	Add a new secondary PIN pad.
Delete POP	Select and delete a secondary PIN pad from the displayed list.
POP ID	Displays the POP ID.
Model	Displays the secondary PIN pad model.
IP Address	Displays the IP address for the secondary PIN pad.
Port	Displays the port for the secondary PIN pad.
Connect with TLS	Select if the secondary PIN pad is communicating on TLS.
Secure Port	Displays the secure port.
Signature Capture Enabled	Enable signature capture on the secondary PIN pad.
Discard	Remove any changes made to this form.
Apply Changes	Save all changes made to this form.