Gilbarco

Gilbarco: FlexPay IV (M7)

For Chevron sites, they should use 6.8.2.25-x VIPA. Chevron is not certified for 6.8.2.32. The version to load would be xx.13.10_US00.05. (xx - being the PCI of the dispenser > PCI 4 being 04 and PCI 5 would be 05. For the version to load, PCI 4.0 would be 42 and PCI 5.0 would be 52.)

If the site has FlexPay IV v42.11.47 or v52.11.47 and debit transactions are receiving an “INVALID PIN” response from the host, Gilbarco has corrected this with the v42.11.53 and v52.11.53 software releases.

Cash Acceptors are not supported with EMV.

GSM, SDES, and Master Session are not supported.

EMV Support
EMV Contact	Certified
EMV Contactless	Certified
Supported Options	Minimum Version
EMV (PCI DSS 5.0) Non-Fleet 2.0	52.12.45
EMV (PCI DSS 4.0) Non-Fleet 2.0	42.12.45
Fleet 2.0 Version (PCI DSS 5.0)	FPIVOPT_V05.13.10_US00.07
Fleet 2.0 Version (PCI DSS 4.0)	FPIVOPT_V04.13.10_US00.07
Fleet 2.0 VIPA	6.8.2.32 (For Chevron sites, see note below.)
Graphics	42.05.11 - P609
Applause (Graphics)	42.05.11 - P609
Cash Acceptors	42.05.11 - P609
Scanner
Contactless (RFID) with UX 400	42.05.11 - P609
Debit
Non-Debit	42.05.11 - P609
TDES	42.05.11 - P609

Gilbarco: FlexPay II (M5)

Gilbarco has announced December 31, 2024 as the end-of-support date for FlexPay 2 (FP2). Software released by Verifone prior to this date may still include FP2 as an install option; however, Verifone will not provide any software corrections for this device. Additionally, the Helpdesk may not be able to offer support for FP2 beyond basic troubleshooting.

Cash Acceptors are not supported with EMV.

GSM, SDES, and Master Session are not supported.

EMV Support
EMV Contact	Certified
EMV Contactless	Certified
Supported Options	Minimum Version
EMV	3.6.06
Graphics	30.3.03
Cash Acceptors	30.3.03
Scanner
Debit
Non-Debit	30.3.03
TDES	30.3.03

Z80 Logic Board

Cash Acceptors, GSM, Graphics, Scanner, Contactless (RFID), SDES, TDES, and Master Session are not supported.

Supported Options	Minimum Version
Debit
Non-Debit	50.2.4

Encrypting PIN Pad (EPP) with Advanced GSM

An Advanced GSM is not required if EPP is injected with the correct debit key. However, it can be used until the EPPs are injected with the correct debit key.

Master Session and Cash Acceptors are not supported.

Please contact your Gilbarco servicer for the correct setup of the EPP and the mapping of the keypad.

Supported Options	Minimum Version
Advanced GSM	See CRIND versions below.
Graphics
Scanner
Contactless (RFID)
Debit
SDES (DUKPT)	See CRIND versions below.
TDES
CRINDs
Advantage	62.6.10
Encore 300	62.6.10
Encore 500	3.1.50
Ecilpse	3.1.50

Advantage CRIND (Z180 Logic Board)

InfoScreen graphics are supported only in single-line mode. Version 60.7.30 is NOT supported for any mode.

TDES and Master Session are not supported.

Supported Options	Minimum Version
Cash Acceptors	60.9.40
GSM
Graphics: Monochrome	609.40
Graphics: InfoScreen	609.40
Scanner	609.40
Contactless (RFID)	609.40
Debit
Non-Debit	60.9.40
TDES	60.9.40

Encore 300

InfoScreen graphics are supported only in single-line mode. Version 60.7.30 is NOT supported for any mode.

TDES and Master Session are not supported.

Supported Options	Minimum Version
Cash Acceptors	60.9.40
GSM
Graphics: Monochrome	609.40
Graphics: InfoScreen	609.40
Scanner	609.40
Contactless (RFID)	609.40
Debit
Non-Debit	60.9.40
TDES	60.9.40

Encore 500/Eclipse

Contactless (RFID), TDES and M/S are not supported.

Supported Options	Minimum Version
Cash Acceptors
GSM
Graphics: Monochrome
Debit
Non-Debit
SDES (DUKPT)