> For the complete documentation index, see [llms.txt](https://docs.verifone.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.verifone.com/support-uk/p400/how-tos/how-to-configure-the-ecr-ms-windows-for-rndis.md).

# How to Configure the ECR (MS Windows) for RNDIS

Configure a Windows ECR to communicate with the P400+ over RNDIS.

{% hint style="info" %}
**Use this when** you need to set up the Windows ECR side of an RNDIS (IP over USB) connection to a P400+ terminal.
{% endhint %}

{% hint style="warning" %}
**Do NOT use this when** you have not yet configured the payment device itself (see How to Configure the P400 to support RNDIS) — that stage comes first.
{% endhint %}

This page explains how to configure a Windows ECR to communicate with the P400+ over RNDIS. This is the second of three stages in setting up RNDIS — see RNDIS Protocol Configuration for the full picture.

{% hint style="warning" %}
**Before you start.** Install the supplied Verifone driver package (`VerifoneUnifiedDriverInstaller-v05.00.05.02-B3` or a later version) **before** plugging in the P400+. Read the documentation supplied with the driver and note any Microsoft or Verifone prerequisites.
{% endhint %}

## Configure the ECR

{% stepper %}
{% step %}

### Install the Verifone driver

Before plugging in the P400+, install the supplied Verifone driver package. If you are using the silent installer, it is recommended to use the flag `IGNOREHWSERNUM=1` — this prevents the need to set up Internet Connection Sharing again if the device is swapped out. If you don't use the silent installer, this setting can be changed manually in the Registry Editor.
{% endstep %}

{% step %}

### Apply Windows prerequisites

**Windows 10** has a known issue where the Internet Connection Sharing service does not restart after a reboot. See [Microsoft's guidance](https://support.microsoft.com/en-gb/help/4055559/ics-doesn-t-work-after-computer-or-service-restart-on-windows-10) and ensure the service is set up as described there.

**Windows 7 and Windows 8.1** are not affected by that issue, but make sure the OS is fully up to date, including patches `KB2905407` and `KB3033929`.
{% endstep %}

{% step %}

### Plug in the P400+ and check the driver

After installing the driver and resolving any Windows prerequisites, plug in the P400+. Open **Device Manager** and confirm the P400+ shows as an **RNDIS6 Network adaptor**, with no driver issues reported.
{% endstep %}

{% step %}

### Check the network connections

Open the **Network Connections** manager. Depending on configuration, you should see at least two networks: the LAN network, and the RNDIS 6 network. The RNDIS6 connection will be listed as **Unidentified** — this is normal.
{% endstep %}

{% step %}

### Configure the RNDIS 6.0 network

Select the **RNDIS 6.0** network, open its properties, and configure the IPv4 settings as specified for your setup.
{% endstep %}

{% step %}

### Share the internet connection

Select the **Ethernet connection** that provides the LAN and internet connectivity. Set this up to share its internet connectivity with the RNDIS6 adaptor configured in the previous step, selecting the RNDIS 6 network as the network that will connect to the internet via the shared access. Once saved, go back to the RNDIS 6 adaptor settings to confirm nothing has changed.
{% endstep %}
{% endstepper %}

## Guidelines

* Always install the Verifone driver **before** plugging in the P400+.
* Use the `IGNOREHWSERNUM=1` flag with silent installers to avoid re-doing Internet Connection Sharing setup when swapping out a device.
* The RNDIS6 connection showing as "Unidentified" in Network Connections is expected behaviour, not an error.
* After configuring Internet Connection Sharing, double-check the RNDIS 6 adaptor settings haven't changed.

## FAQ

<details>

<summary>Do I need to install the driver before or after plugging in the P400+?</summary>

Before. Install the Verifone driver package first, then plug in the P400+.

</details>

<details>

<summary>Why does the RNDIS6 connection show as "Unidentified"?</summary>

This is normal behaviour for the RNDIS6 connection in Network Connections.

</details>

<details>

<summary>What if Internet Connection Sharing doesn't restart after a reboot?</summary>

This is a known Windows 10 issue. Refer to Microsoft's support article for the fix, then reapply the sharing configuration on the ECR.

</details>

<details>

<summary>Keywords</summary>

Also called: RNDIS ECR setup, Windows RNDIS configuration, Internet Connection Sharing, ICS. Search terms: RNDIS6, Device Manager, Network Connections, Verifone driver, P400+.

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.verifone.com/support-uk/p400/how-tos/how-to-configure-the-ecr-ms-windows-for-rndis.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
